K0FTT Automobiles

My position About ☰

reset

VO2AGO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VO2AGO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	LiPo*	IndoorTemp*	FreezerTemp*	BatteryTemp*
1768582115	14.31 V	11.1 V	-12.5 C	-13.1 C	50 C
1768581664	14.42 V	11.1 V	-12.7 C	-13.1 C	50 C
1768581214	14.4 V	11.1 V	-12.9 C	-13.1 C	50 C
1768580314	14.43 V	11.1 V	-13.4 C	-13.1 C	50 C
1768579865	14.42 V	11.1 V	-13.6 C	-13.1 C	50 C
1768579415	14.39 V	11.1 V	-13.9 C	-13.1 C	50 C
1768578515	14.42 V	11.1 V	-14.3 C	-13 C	50 C
1768578065	14.33 V	11.1 V	-14.6 C	-13 C	50 C
1768577164	14.34 V	11.1 V	-14.9 C	-12.9 C	50 C
1768576714	14.36 V	11.1 V	-15.2 C	-12.9 C	50 C
1768576265	14.32 V	11.1 V	-15.3 C	-12.9 C	50 C
1768575815	14.31 V	11.1 V	-15.5 C	-12.9 C	50 C
1768575364	14.32 V	11.1 V	-15.6 C	-12.9 C	50 C
1768574465	14.3 V	11.1 V	-15.9 C	-12.8 C	50 C
1768574014	14.27 V	11.1 V	-16 C	-12.8 C	50 C
1768573564	14.32 V	11.1 V	-16.1 C	-12.8 C	50 C
1768573115	14.3 V	11.1 V	-16.1 C	-12.7 C	50 C
1768572214	14.25 V	11.1 V	-16.1 C	-12.6 C	50 C
1768571765	14.07 V	11.1 V	-16.1 C	-12.6 C	50 C
1768571316	13.49 V	11.1 V	-16.1 C	-12.6 C	50 C
1768570866	13.61 V	11.1 V	-16.1 C	-12.6 C	50 C
1768570415	14.22 V	11.1 V	-16.1 C	-12.5 C	50 C
1768569965	13.31 V	11.1 V	-16.1 C	-12.5 C	50 C
1768569514	12.51 V	11.1 V	-16 C	-12.5 C	50 C
1768568614	12.33 V	11.1 V	-15.9 C	-12.4 C	50 C

*Used Equation Coefficients:

Battery: 0, 0.01, 0

LiPo: 0, 0.01, 0

IndoorTemp: 0, 0.01, -50

FreezerTemp: 0, 0.01, -50

BatteryTemp: 0, 0.1, -50

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)