This is the latest recevied telemetry packets stored in our database for station/object SP2WM-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792890353 | 281 Count | 641 Count | 179 Count | 0 VDC | 0 VDC |
| 1792889452 | 280 Count | 641 Count | 179 Count | 0 VDC | 0 VDC |
| 1792888552 | 279 Count | 641 Count | 179 Count | 0 VDC | 0 VDC |
| 1792887651 | 278 Count | 641 Count | 179 Count | 0 VDC | 0 VDC |
| 1792886750 | 277 Count | 638 Count | 179 Count | 0 VDC | 0 VDC |
| 1792885850 | 275 Count | 635 Count | 178 Count | 0 VDC | 0 VDC |
| 1792884948 | 273 Count | 631 Count | 177 Count | 0 VDC | 0 VDC |
| 1792884048 | 270 Count | 626 Count | 175 Count | 0 VDC | 0 VDC |
| 1792883147 | 267 Count | 619 Count | 173 Count | 0 VDC | 0 VDC |
| 1792882246 | 265 Count | 611 Count | 172 Count | 0 VDC | 0 VDC |
| 1792881345 | 262 Count | 603 Count | 170 Count | 0 VDC | 0 VDC |
| 1792880445 | 259 Count | 597 Count | 168 Count | 0 VDC | 0 VDC |
| 1792879544 | 255 Count | 588 Count | 165 Count | 0 VDC | 0 VDC |
| 1792878643 | 252 Count | 575 Count | 163 Count | 0 VDC | 0 VDC |
| 1792877742 | 249 Count | 568 Count | 161 Count | 0 VDC | 0 VDC |
| 1792876841 | 245 Count | 556 Count | 158 Count | 0 VDC | 0 VDC |
| 1792875941 | 239 Count | 541 Count | 153 Count | 0 VDC | 0 VDC |
| 1792875040 | 237 Count | 527 Count | 152 Count | 0 VDC | 0 VDC |
| 1792874139 | 232 Count | 510 Count | 148 Count | 0 VDC | 0 VDC |
| 1792873238 | 229 Count | 496 Count | 146 Count | 0 VDC | 0 VDC |
| 1792872337 | 225 Count | 485 Count | 143 Count | 0 VDC | 0 VDC |
| 1792871437 | 223 Count | 476 Count | 142 Count | 0 VDC | 0 VDC |
| 1792870554 | 216 Count | 465 Count | 140 Count | 0 VDC | 0 VDC |
| 1792869653 | 213 Count | 441 Count | 138 Count | 0 VDC | 0 VDC |
| 1792868752 | 205 Count | 419 Count | 131 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)