This is the latest recevied telemetry packets stored in our database for station/object SQ2MTG-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770102370 | 366 Count | 653 Count | 329 Count | 4.14 VDC | 0 VDC |
| 1770101469 | 357 Count | 639 Count | 321 Count | 4.15 VDC | 0 VDC |
| 1770100568 | 351 Count | 629 Count | 316 Count | 4.15 VDC | 0 VDC |
| 1770099667 | 339 Count | 608 Count | 305 Count | 4.15 VDC | 0 VDC |
| 1770098766 | 333 Count | 597 Count | 300 Count | 4.15 VDC | 0 VDC |
| 1770097865 | 322 Count | 568 Count | 290 Count | 4.15 VDC | 0 VDC |
| 1770096965 | 297 Count | 526 Count | 266 Count | 4.15 VDC | 0 VDC |
| 1770096064 | 275 Count | 478 Count | 245 Count | 4.15 VDC | 0 VDC |
| 1770095163 | 267 Count | 465 Count | 238 Count | 4.15 VDC | 0 VDC |
| 1770094262 | 258 Count | 451 Count | 230 Count | 4.15 VDC | 0 VDC |
| 1770093361 | 252 Count | 443 Count | 225 Count | 4.15 VDC | 0 VDC |
| 1770092460 | 243 Count | 427 Count | 217 Count | 4.15 VDC | 0 VDC |
| 1770091559 | 237 Count | 418 Count | 212 Count | 4.15 VDC | 0 VDC |
| 1770090659 | 232 Count | 408 Count | 208 Count | 4.15 VDC | 0 VDC |
| 1770089780 | 225 Count | 393 Count | 202 Count | 4.15 VDC | 0 VDC |
| 1770088879 | 218 Count | 379 Count | 196 Count | 4.15 VDC | 0 VDC |
| 1770087978 | 212 Count | 368 Count | 191 Count | 4.15 VDC | 0 VDC |
| 1770087077 | 204 Count | 355 Count | 184 Count | 4.15 VDC | 0 VDC |
| 1770086176 | 198 Count | 344 Count | 179 Count | 4.15 VDC | 0 VDC |
| 1770085275 | 190 Count | 328 Count | 172 Count | 4.15 VDC | 0 VDC |
| 1770084374 | 183 Count | 317 Count | 166 Count | 4.15 VDC | 0 VDC |
| 1770083473 | 174 Count | 301 Count | 158 Count | 4.15 VDC | 0 VDC |
| 1770082572 | 167 Count | 287 Count | 152 Count | 4.15 VDC | 0 VDC |
| 1770081671 | 159 Count | 272 Count | 145 Count | 4.15 VDC | 0 VDC |
| 1770080771 | 154 Count | 262 Count | 141 Count | 4.15 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)