This is the latest recevied telemetry packets stored in our database for station/object F6HFY-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770078305 | 431 | 0 | 0 | 0 | 0 |
| 1770076505 | 431 | 0 | 0 | 0 | 0 |
| 1770074700 | 431 | 0 | 0 | 0 | 0 |
| 1770072900 | 430 | 0 | 0 | 0 | 0 |
| 1770071100 | 428 | 0 | 0 | 0 | 0 |
| 1770069300 | 429 | 0 | 0 | 0 | 0 |
| 1770067499 | 429 | 0 | 0 | 0 | 0 |
| 1770065705 | 431 | 0 | 0 | 0 | 0 |
| 1770063905 | 431 | 0 | 0 | 0 | 0 |
| 1770062106 | 430 | 0 | 0 | 0 | 0 |
| 1770060305 | 430 | 0 | 0 | 0 | 0 |
| 1770058505 | 432 | 0 | 0 | 0 | 0 |
| 1770056704 | 431 | 0 | 0 | 0 | 0 |
| 1770054910 | 432 | 0 | 0 | 0 | 0 |
| 1770053099 | 430 | 0 | 0 | 0 | 0 |
| 1770051299 | 429 | 0 | 0 | 0 | 0 |
| 1770049500 | 431 | 0 | 0 | 0 | 0 |
| 1770047699 | 430 | 0 | 0 | 0 | 0 |
| 1770045898 | 431 | 0 | 0 | 0 | 0 |
| 1770044105 | 433 | 0 | 0 | 0 | 0 |
| 1770042305 | 430 | 0 | 0 | 0 | 0 |
| 1770040513 | 430 | 0 | 0 | 0 | 0 |
| 1770038704 | 429 | 0 | 0 | 0 | 0 |
| 1770036904 | 430 | 0 | 0 | 0 | 0 |
| 1770035107 | 430 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)