This is the latest recevied telemetry packets stored in our database for station/object SQ2MTG-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777370139 | 439 Count | 869 Count | 364 Count | 4.11 VDC | 0 VDC |
| 1777369238 | 433 Count | 857 Count | 359 Count | 4.1 VDC | 0 VDC |
| 1777368337 | 426 Count | 845 Count | 353 Count | 4.11 VDC | 0 VDC |
| 1777367436 | 420 Count | 835 Count | 348 Count | 4.11 VDC | 0 VDC |
| 1777366535 | 415 Count | 826 Count | 344 Count | 4.11 VDC | 0 VDC |
| 1777365634 | 409 Count | 816 Count | 339 Count | 4.11 VDC | 0 VDC |
| 1777364734 | 402 Count | 804 Count | 333 Count | 4.11 VDC | 0 VDC |
| 1777363833 | 396 Count | 792 Count | 328 Count | 4.11 VDC | 0 VDC |
| 1777362932 | 391 Count | 779 Count | 324 Count | 4.11 VDC | 0 VDC |
| 1777362031 | 385 Count | 770 Count | 319 Count | 4.11 VDC | 0 VDC |
| 1777361130 | 379 Count | 760 Count | 314 Count | 4.11 VDC | 0 VDC |
| 1777360229 | 373 Count | 750 Count | 309 Count | 4.11 VDC | 0 VDC |
| 1777359328 | 368 Count | 739 Count | 305 Count | 4.11 VDC | 0 VDC |
| 1777358428 | 362 Count | 726 Count | 300 Count | 4.11 VDC | 0 VDC |
| 1777357527 | 356 Count | 712 Count | 295 Count | 4.11 VDC | 0 VDC |
| 1777356646 | 343 Count | 697 Count | 287 Count | 4.11 VDC | 0 VDC |
| 1777355745 | 337 Count | 684 Count | 282 Count | 4.11 VDC | 0 VDC |
| 1777354844 | 328 Count | 671 Count | 274 Count | 4.11 VDC | 0 VDC |
| 1777353943 | 322 Count | 662 Count | 269 Count | 4.11 VDC | 0 VDC |
| 1777353042 | 310 Count | 645 Count | 258 Count | 4.11 VDC | 0 VDC |
| 1777352142 | 304 Count | 633 Count | 253 Count | 4.11 VDC | 0 VDC |
| 1777351241 | 296 Count | 620 Count | 246 Count | 4.11 VDC | 0 VDC |
| 1777350340 | 289 Count | 608 Count | 240 Count | 4.11 VDC | 0 VDC |
| 1777349439 | 282 Count | 597 Count | 234 Count | 4.11 VDC | 0 VDC |
| 1777348537 | 276 Count | 577 Count | 229 Count | 4.11 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)