This is the latest recevied telemetry packets stored in our database for station/object OR7F-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1768830787 | 17 | 1193 | 3123 | 77 | 0 |
| 1768829692 | 17 | 1229 | 3122 | 77 | 0 |
| 1768826492 | 13 | 1232 | 3114 | 77 | 0 |
| 1768825852 | 15 | 1232 | 3109 | 77 | 0 |
| 1768825547 | 14 | 1230 | 3105 | 78 | 0 |
| 1768825212 | 14 | 1232 | 3101 | 78 | 0 |
| 1768824907 | 14 | 1232 | 3096 | 78 | 0 |
| 1768824462 | 14 | 1232 | 3089 | 78 | 0 |
| 1768823772 | 13 | 1232 | 3071 | 78 | 0 |
| 1768822457 | 8 | 1232 | 3014 | 80 | 0 |
| 1768822102 | 14 | 1232 | 2993 | 80 | 0 |
| 1768821777 | 13 | 1232 | 2969 | 80 | 0 |
| 1768821442 | 9 | 1228 | 2941 | 81 | 0 |
| 1768820782 | 13 | 1225 | 2882 | 80 | 0 |
| 1768820467 | 13 | 1359 | 2854 | 80 | 0 |
| 1768820157 | 13 | 1357 | 2829 | 79 | 0 |
| 1768819502 | 14 | 1353 | 2786 | 78 | 0 |
| 1768818892 | 14 | 1314 | 2748 | 77 | 0 |
| 1768818577 | 14 | 1225 | 2729 | 77 | 0 |
| 1768817942 | 8 | 1223 | 2684 | 78 | 0 |
| 1768817637 | 15 | 1225 | 2659 | 77 | 0 |
| 1768817332 | 8 | 1354 | 2647 | 75 | 0 |
| 1768817032 | 14 | 1182 | 2641 | 73 | 0 |
| 1768813997 | 16 | 1214 | 2626 | 72 | 0 |
| 1768813082 | 11 | 1212 | 2625 | 72 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)