This is the latest recevied telemetry packets stored in our database for station/object CE3TDM-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1764284443 | 4.02 VDC | -50 C | 0 % | 0 hPa | 0 |
| 1764284282 | 4.01 VDC | -50 C | 0 % | 0 hPa | 0 |
| 1764284227 | 4.02 VDC | -50 C | 0 % | 0 hPa | 0 |
| 1764284183 | 4.02 VDC | -50 C | 0 % | 0 hPa | 0 |
| 1764284155 | 4.02 VDC | -50 C | 0 % | 0 hPa | 0 |
| 1764284013 | 4.02 VDC | -50 C | 0 % | 0 hPa | 0 |
| 1764283959 | 4.03 VDC | -50 C | 0 % | 0 hPa | 0 |
| 1764283801 | 4.03 VDC | -50 C | 0 % | 0 hPa | 0 |
| 1764283079 | 4.04 VDC | -50 C | 0 % | 0 hPa | 0 |
| 1764282793 | 4.04 VDC | -50 C | 0 % | 0 hPa | 0 |
| 1764282681 | 4.04 VDC | -50 C | 0 % | 0 hPa | 0 |
| 1764282184 | 4.05 VDC | -50 C | 0 % | 0 hPa | 0 |
| 1764280646 | 4.07 VDC | 25.6 C | 48.58 % | 0 hPa | 0 |
| 1764279742 | 4.07 VDC | 25.8 C | 50.22 % | 0 hPa | 0 |
| 1764279578 | 4.09 VDC | 25.7 C | 50.52 % | 0 hPa | 0 |
| 1764279462 | 4.09 VDC | 25.6 C | 50.53 % | 1034.88 hPa | 0 |
| 1764279256 | 4.09 VDC | 25.5 C | 50.69 % | 1034.5 hPa | 0 |
| 1764279124 | 4.09 VDC | 25.3 C | 51.14 % | 1033.63 hPa | 0 |
| 1764278992 | 4.09 VDC | 25.2 C | 51.87 % | 1034.13 hPa | 0 |
| 1764278825 | 4.1 VDC | 25.1 C | 51.86 % | 1032.38 hPa | 0 |
| 1764278609 | 4.1 VDC | 24.9 C | 52.39 % | 1033 hPa | 0 |
| 1764278431 | 4.1 VDC | 24.7 C | 53.06 % | 1031.38 hPa | 0 |
| 1764278217 | 4.11 VDC | 24.5 C | 54.29 % | 1030.38 hPa | 0 |
| 1764278114 | 4.11 VDC | 24.3 C | 54.91 % | 1030.38 hPa | 0 |
| 1764277972 | 4.11 VDC | 24.1 C | 55.07 % | 1029.38 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)