This is the latest recevied telemetry packets stored in our database for station/object LB3AG-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785360177 | 451 Count | 992 Count | 335 Count | 0 VDC | 0 VDC |
| 1785359574 | 449 Count | 989 Count | 334 Count | 0 VDC | 0 VDC |
| 1785358971 | 444 Count | 984 Count | 330 Count | 0 VDC | 0 VDC |
| 1785358368 | 440 Count | 977 Count | 327 Count | 0 VDC | 0 VDC |
| 1785357765 | 437 Count | 973 Count | 325 Count | 0 VDC | 0 VDC |
| 1785357162 | 432 Count | 968 Count | 321 Count | 0 VDC | 0 VDC |
| 1785356559 | 429 Count | 962 Count | 319 Count | 0 VDC | 0 VDC |
| 1785355956 | 426 Count | 955 Count | 317 Count | 0 VDC | 0 VDC |
| 1785355462 | 423 Count | 950 Count | 315 Count | 0 VDC | 0 VDC |
| 1785354859 | 418 Count | 941 Count | 311 Count | 0 VDC | 0 VDC |
| 1785354256 | 415 Count | 935 Count | 309 Count | 0 VDC | 0 VDC |
| 1785353653 | 411 Count | 930 Count | 306 Count | 0 VDC | 0 VDC |
| 1785353050 | 407 Count | 924 Count | 303 Count | 0 VDC | 0 VDC |
| 1785352447 | 404 Count | 919 Count | 301 Count | 0 VDC | 0 VDC |
| 1785351843 | 400 Count | 915 Count | 298 Count | 0 VDC | 0 VDC |
| 1785351240 | 395 Count | 907 Count | 294 Count | 0 VDC | 0 VDC |
| 1785350637 | 392 Count | 903 Count | 292 Count | 0 VDC | 0 VDC |
| 1785350034 | 388 Count | 897 Count | 289 Count | 0 VDC | 0 VDC |
| 1785349431 | 384 Count | 891 Count | 286 Count | 0 VDC | 0 VDC |
| 1785348828 | 382 Count | 889 Count | 285 Count | 0 VDC | 0 VDC |
| 1785348225 | 378 Count | 884 Count | 282 Count | 0 VDC | 0 VDC |
| 1785347622 | 374 Count | 877 Count | 279 Count | 0 VDC | 0 VDC |
| 1785347019 | 371 Count | 870 Count | 277 Count | 0 VDC | 0 VDC |
| 1785346416 | 367 Count | 864 Count | 274 Count | 0 VDC | 0 VDC |
| 1785345813 | 363 Count | 856 Count | 271 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)