This is the latest recevied telemetry packets stored in our database for station/object IW2HTZ-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789455246 | 122 Count | 862 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789454343 | 121 Count | 856 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789453439 | 120 Count | 849 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789452535 | 119 Count | 842 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789451627 | 118 Count | 836 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789450723 | 117 Count | 831 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789449916 | 116 Count | 826 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789449012 | 115 Count | 821 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789448108 | 114 Count | 812 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789447204 | 113 Count | 806 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789446300 | 112 Count | 800 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789445397 | 111 Count | 795 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789444493 | 110 Count | 787 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789443585 | 109 Count | 782 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789442685 | 108 Count | 777 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789441777 | 107 Count | 768 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789440877 | 106 Count | 761 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789439969 | 105 Count | 756 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789439069 | 104 Count | 747 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789438165 | 103 Count | 742 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789437261 | 102 Count | 733 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789436358 | 101 Count | 727 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789435454 | 100 Count | 720 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789434550 | 99 Count | 714 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789433642 | 98 Count | 706 Count | 0 Count | 0.28 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)