This is the latest recevied telemetry packets stored in our database for station/object VK3AFQ-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1768830338 | 245 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768828534 | 244 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768826730 | 243 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768824926 | 242 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768823121 | 241 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768821316 | 240 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768819511 | 239 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768817707 | 238 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768815902 | 237 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768814098 | 236 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768812294 | 235 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768810490 | 234 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768808736 | 233 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768806932 | 232 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768805128 | 231 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768803324 | 230 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768801519 | 229 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768799714 | 228 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768797910 | 227 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768796105 | 226 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768794300 | 225 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768792496 | 224 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768790692 | 223 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768788888 | 222 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)