This is the latest recevied telemetry packets stored in our database for station/object SR7NSI-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789695778 | 821 Count | 889 Count | 26 Count | 0 VDC | 0 VDC |
| 1789695177 | 820 Count | 887 Count | 26 Count | 0 VDC | 0 VDC |
| 1789694576 | 819 Count | 886 Count | 26 Count | 0 VDC | 0 VDC |
| 1789693975 | 818 Count | 884 Count | 26 Count | 0 VDC | 0 VDC |
| 1789693374 | 817 Count | 884 Count | 26 Count | 0 VDC | 0 VDC |
| 1789692773 | 816 Count | 883 Count | 26 Count | 0 VDC | 0 VDC |
| 1789692172 | 815 Count | 882 Count | 26 Count | 0 VDC | 0 VDC |
| 1789691572 | 814 Count | 881 Count | 26 Count | 0 VDC | 0 VDC |
| 1789690971 | 813 Count | 880 Count | 26 Count | 0 VDC | 0 VDC |
| 1789690371 | 812 Count | 874 Count | 26 Count | 0 VDC | 0 VDC |
| 1789689800 | 807 Count | 873 Count | 26 Count | 0 VDC | 0 VDC |
| 1789689199 | 806 Count | 872 Count | 26 Count | 0 VDC | 0 VDC |
| 1789688598 | 805 Count | 871 Count | 26 Count | 0 VDC | 0 VDC |
| 1789687998 | 804 Count | 870 Count | 26 Count | 0 VDC | 0 VDC |
| 1789687397 | 803 Count | 869 Count | 26 Count | 0 VDC | 0 VDC |
| 1789686796 | 802 Count | 868 Count | 26 Count | 0 VDC | 0 VDC |
| 1789686195 | 801 Count | 868 Count | 26 Count | 0 VDC | 0 VDC |
| 1789685594 | 800 Count | 867 Count | 26 Count | 0 VDC | 0 VDC |
| 1789684993 | 799 Count | 867 Count | 26 Count | 0 VDC | 0 VDC |
| 1789684392 | 798 Count | 866 Count | 26 Count | 0 VDC | 0 VDC |
| 1789683791 | 797 Count | 865 Count | 26 Count | 0 VDC | 0 VDC |
| 1789683191 | 796 Count | 864 Count | 26 Count | 0 VDC | 0 VDC |
| 1789682591 | 795 Count | 863 Count | 26 Count | 0 VDC | 0 VDC |
| 1789681989 | 794 Count | 862 Count | 26 Count | 0 VDC | 0 VDC |
| 1789681388 | 793 Count | 861 Count | 26 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)