This is the latest recevied telemetry packets stored in our database for station/object SQ9ITQ-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1779699329 | 782 Count | 259 Count | 83 Count | 0 VDC | 0 VDC |
| 1779697528 | 768 Count | 246 Count | 70 Count | 0 VDC | 0 VDC |
| 1779695727 | 767 Count | 246 Count | 70 Count | 0 VDC | 0 VDC |
| 1779693927 | 766 Count | 246 Count | 70 Count | 0 VDC | 0 VDC |
| 1779692126 | 765 Count | 246 Count | 70 Count | 0 VDC | 0 VDC |
| 1779690325 | 764 Count | 246 Count | 70 Count | 0 VDC | 0 VDC |
| 1779688525 | 751 Count | 234 Count | 58 Count | 0 VDC | 0 VDC |
| 1779686724 | 750 Count | 234 Count | 58 Count | 0 VDC | 0 VDC |
| 1779684923 | 749 Count | 234 Count | 58 Count | 0 VDC | 0 VDC |
| 1779683123 | 748 Count | 234 Count | 58 Count | 0 VDC | 0 VDC |
| 1779659126 | 735 Count | 185 Count | 58 Count | 0 VDC | 0 VDC |
| 1779657325 | 734 Count | 166 Count | 58 Count | 0 VDC | 0 VDC |
| 1779655524 | 733 Count | 149 Count | 58 Count | 0 VDC | 0 VDC |
| 1779653724 | 732 Count | 121 Count | 58 Count | 0 VDC | 0 VDC |
| 1779651923 | 731 Count | 96 Count | 58 Count | 0 VDC | 0 VDC |
| 1779650122 | 730 Count | 86 Count | 58 Count | 0 VDC | 0 VDC |
| 1779648322 | 729 Count | 86 Count | 58 Count | 0 VDC | 0 VDC |
| 1779646521 | 728 Count | 86 Count | 58 Count | 0 VDC | 0 VDC |
| 1779644720 | 727 Count | 86 Count | 58 Count | 0 VDC | 0 VDC |
| 1779642920 | 726 Count | 86 Count | 58 Count | 0 VDC | 0 VDC |
| 1779641119 | 725 Count | 86 Count | 58 Count | 0 VDC | 0 VDC |
| 1779639319 | 723 Count | 85 Count | 57 Count | 0 VDC | 0 VDC |
| 1779637525 | 722 Count | 85 Count | 57 Count | 0 VDC | 0 VDC |
| 1779635724 | 721 Count | 85 Count | 57 Count | 0 VDC | 0 VDC |
| 1779633923 | 720 Count | 85 Count | 57 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)