This is the latest recevied telemetry packets stored in our database for station/object KK7LLM-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1768838171 | 478 Volts | 582 Deg.F | 343 | 0 | 0 |
| 1768838123 | 477 Volts | 581 Deg.F | 343 | 0 | 0 |
| 1768838019 | 479 Volts | 580 Deg.F | 346 | 0 | 0 |
| 1768837899 | 476 Volts | 577 Deg.F | 347 | 0 | 0 |
| 1768837860 | 477 Volts | 577 Deg.F | 343 | 0 | 0 |
| 1768837853 | 475 Volts | 578 Deg.F | 513 | 0 | 0 |
| 1768837843 | 476 Volts | 576 Deg.F | 352 | 0 | 0 |
| 1768837789 | 476 Volts | 576 Deg.F | 350 | 0 | 0 |
| 1768837650 | 473 Volts | 573 Deg.F | 353 | 0 | 0 |
| 1768837582 | 473 Volts | 572 Deg.F | 351 | 0 | 0 |
| 1768837557 | 474 Volts | 571 Deg.F | 348 | 0 | 0 |
| 1768837546 | 473 Volts | 571 Deg.F | 357 | 0 | 0 |
| 1768837401 | 475 Volts | 568 Deg.F | 342 | 0 | 0 |
| 1768837370 | 472 Volts | 567 Deg.F | 344 | 0 | 0 |
| 1768837334 | 475 Volts | 567 Deg.F | 348 | 0 | 0 |
| 1768837322 | 470 Volts | 566 Deg.F | 355 | 0 | 0 |
| 1768837315 | 471 Volts | 566 Deg.F | 354 | 0 | 0 |
| 1768837065 | 472 Volts | 560 Deg.F | 354 | 0 | 0 |
| 1768837055 | 471 Volts | 559 Deg.F | 353 | 0 | 0 |
| 1768837016 | 470 Volts | 557 Deg.F | 354 | 0 | 0 |
| 1768836974 | 470 Volts | 555 Deg.F | 352 | 0 | 0 |
| 1768836964 | 472 Volts | 555 Deg.F | 360 | 0 | 0 |
| 1768836809 | 473 Volts | 551 Deg.F | 620 | 0 | 0 |
| 1768782257 | 471 Volts | 605 Deg.F | 325 | 0 | 0 |
| 1768782252 | 474 Volts | 605 Deg.F | 315 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)