This is the latest recevied telemetry packets stored in our database for station/object F5ZZW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789676138 | 276 Count | 330 Count | 156 Count | 0 VDC | 0 VDC |
| 1789675532 | 247 Count | 318 Count | 145 Count | 0 VDC | 0 VDC |
| 1789674925 | 211 Count | 306 Count | 137 Count | 0 VDC | 0 VDC |
| 1789674319 | 191 Count | 298 Count | 130 Count | 0 VDC | 0 VDC |
| 1789673713 | 189 Count | 295 Count | 129 Count | 0 VDC | 0 VDC |
| 1789673107 | 186 Count | 292 Count | 127 Count | 0 VDC | 0 VDC |
| 1789672501 | 185 Count | 291 Count | 127 Count | 0 VDC | 0 VDC |
| 1789671894 | 183 Count | 288 Count | 126 Count | 0 VDC | 0 VDC |
| 1789671288 | 179 Count | 283 Count | 123 Count | 0 VDC | 0 VDC |
| 1789670682 | 174 Count | 277 Count | 119 Count | 0 VDC | 0 VDC |
| 1789670076 | 172 Count | 275 Count | 118 Count | 0 VDC | 0 VDC |
| 1789669470 | 170 Count | 271 Count | 117 Count | 0 VDC | 0 VDC |
| 1789668863 | 166 Count | 259 Count | 114 Count | 0 VDC | 0 VDC |
| 1789668257 | 160 Count | 243 Count | 109 Count | 0 VDC | 0 VDC |
| 1789667651 | 156 Count | 235 Count | 106 Count | 0 VDC | 0 VDC |
| 1789667045 | 154 Count | 233 Count | 105 Count | 0 VDC | 0 VDC |
| 1789666439 | 152 Count | 231 Count | 104 Count | 0 VDC | 0 VDC |
| 1789665832 | 149 Count | 227 Count | 102 Count | 0 VDC | 0 VDC |
| 1789665226 | 147 Count | 223 Count | 101 Count | 0 VDC | 0 VDC |
| 1789664620 | 144 Count | 220 Count | 99 Count | 0 VDC | 0 VDC |
| 1789664014 | 139 Count | 206 Count | 95 Count | 0 VDC | 0 VDC |
| 1789663408 | 136 Count | 203 Count | 93 Count | 0 VDC | 0 VDC |
| 1789662801 | 133 Count | 194 Count | 91 Count | 0 VDC | 0 VDC |
| 1789662195 | 124 Count | 184 Count | 83 Count | 0 VDC | 0 VDC |
| 1789661589 | 122 Count | 181 Count | 82 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)