This is the latest recevied telemetry packets stored in our database for station/object F5MIW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785338166 | 134 Count | 399 Count | 126 Count | 0 VDC | 0 VDC |
| 1785334562 | 97 Count | 338 Count | 90 Count | 0 VDC | 0 VDC |
| 1785330982 | 85 Count | 313 Count | 79 Count | 0 VDC | 0 VDC |
| 1785327378 | 72 Count | 287 Count | 67 Count | 0 VDC | 0 VDC |
| 1785323774 | 55 Count | 254 Count | 51 Count | 0 VDC | 0 VDC |
| 1785320170 | 42 Count | 218 Count | 39 Count | 0 VDC | 0 VDC |
| 1785316565 | 32 Count | 178 Count | 30 Count | 0 VDC | 0 VDC |
| 1785312961 | 19 Count | 115 Count | 18 Count | 0 VDC | 0 VDC |
| 1785309381 | 9 Count | 54 Count | 9 Count | 0 VDC | 0 VDC |
| 1785305784 | 421 Count | 1044 Count | 354 Count | 0 VDC | 0 VDC |
| 1785302173 | 411 Count | 974 Count | 345 Count | 0 VDC | 0 VDC |
| 1785298568 | 398 Count | 939 Count | 333 Count | 0 VDC | 0 VDC |
| 1785294964 | 386 Count | 902 Count | 322 Count | 0 VDC | 0 VDC |
| 1785291360 | 374 Count | 868 Count | 311 Count | 0 VDC | 0 VDC |
| 1785287789 | 362 Count | 837 Count | 300 Count | 0 VDC | 0 VDC |
| 1785284185 | 350 Count | 806 Count | 289 Count | 0 VDC | 0 VDC |
| 1785280580 | 337 Count | 773 Count | 277 Count | 0 VDC | 0 VDC |
| 1785276976 | 325 Count | 738 Count | 266 Count | 0 VDC | 0 VDC |
| 1785273372 | 312 Count | 708 Count | 254 Count | 0 VDC | 0 VDC |
| 1785269768 | 300 Count | 682 Count | 243 Count | 0 VDC | 0 VDC |
| 1785266779 | 290 Count | 659 Count | 234 Count | 0 VDC | 0 VDC |
| 1785263175 | 278 Count | 633 Count | 223 Count | 0 VDC | 0 VDC |
| 1785259571 | 266 Count | 608 Count | 212 Count | 0 VDC | 0 VDC |
| 1785255966 | 255 Count | 581 Count | 202 Count | 0 VDC | 0 VDC |
| 1785252362 | 243 Count | 548 Count | 191 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)