This is the latest recevied telemetry packets stored in our database for station/object OK1UXX-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783772662 | 578 Count | 222 Count | 57 Count | 4.23 VDC | 0.18 VDC |
| 1783771455 | 576 Count | 221 Count | 57 Count | 4.21 VDC | 0.2 VDC |
| 1783770249 | 574 Count | 221 Count | 57 Count | 4.29 VDC | 0.2 VDC |
| 1783769042 | 572 Count | 220 Count | 57 Count | 4.28 VDC | 0.18 VDC |
| 1783767835 | 570 Count | 219 Count | 57 Count | 4.21 VDC | 0.2 VDC |
| 1783766628 | 568 Count | 219 Count | 57 Count | 4.26 VDC | 0.18 VDC |
| 1783765421 | 566 Count | 218 Count | 57 Count | 4.28 VDC | 0.18 VDC |
| 1783764214 | 564 Count | 217 Count | 57 Count | 4.32 VDC | 0.18 VDC |
| 1783763007 | 562 Count | 217 Count | 57 Count | 4.29 VDC | 0.14 VDC |
| 1783761800 | 560 Count | 216 Count | 57 Count | 4.27 VDC | 0.18 VDC |
| 1783760593 | 558 Count | 215 Count | 57 Count | 4.23 VDC | 0.2 VDC |
| 1783759386 | 556 Count | 215 Count | 57 Count | 4.31 VDC | 0.18 VDC |
| 1783758179 | 554 Count | 214 Count | 57 Count | 4.3 VDC | 0.18 VDC |
| 1783756972 | 552 Count | 213 Count | 57 Count | 4.3 VDC | 0.16 VDC |
| 1783707145 | 551 Count | 213 Count | 57 Count | 4.25 VDC | 0.2 VDC |
| 1783705938 | 549 Count | 213 Count | 57 Count | 4.25 VDC | 0.18 VDC |
| 1783705700 | 548 Count | 213 Count | 57 Count | 4.23 VDC | 0.18 VDC |
| 1783704785 | 546 Count | 213 Count | 57 Count | 4.28 VDC | 0.18 VDC |
| 1783703578 | 544 Count | 212 Count | 57 Count | 4.21 VDC | 0.18 VDC |
| 1783702371 | 542 Count | 212 Count | 57 Count | 4.23 VDC | 0.18 VDC |
| 1783702172 | 541 Count | 212 Count | 57 Count | 4.24 VDC | 0.16 VDC |
| 1783700965 | 539 Count | 211 Count | 57 Count | 4.3 VDC | 0.18 VDC |
| 1783699758 | 537 Count | 210 Count | 57 Count | 4.27 VDC | 0.18 VDC |
| 1783698551 | 535 Count | 210 Count | 57 Count | 4.27 VDC | 0.14 VDC |
| 1783697344 | 533 Count | 209 Count | 57 Count | 4.25 VDC | 0.18 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)