This is the latest recevied telemetry packets stored in our database for station/object KB3ZZJ-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1769975154 | 6 | 79.3 F | 4.09 V | 200 M | 0 |
| 1769971815 | 5 | 78.2 F | 4.13 V | 190 M | 0 |
| 1769970012 | 5 | 77.5 F | 4.14 V | 160 M | 0 |
| 1769965098 | 4 | 77.1 F | 4.19 V | 150 M | 0 |
| 1769946018 | 4 | 77.3 F | 4.1 V | 190 M | 0 |
| 1769944215 | 5 | 77.9 F | 4.12 V | 170 M | 0 |
| 1769942411 | 4 | 78.2 F | 4.13 V | 140 M | 0 |
| 1769939960 | 3 | 78.9 F | 4.16 V | 190 M | 0 |
| 1769932631 | 0 | 84.5 F | 4.21 V | 190 M | 0 |
| 1769930729 | 3 | 85.6 F | 4.19 V | 130 M | 0 |
| 1769927114 | 0 | 82.2 F | 4.07 V | 130 M | 0 |
| 1769924035 | 0 | 83.1 F | 4.1 V | 180 M | 0 |
| 1769920988 | 0 | 83.8 F | 4.12 V | 150 M | 0 |
| 1769918449 | 3 | 84.7 F | 4.14 V | 190 M | 0 |
| 1769896401 | 3 | 85.4 F | 4.08 V | 150 M | 0 |
| 1769892147 | 3 | 83.4 F | 4.11 V | 170 M | 0 |
| 1769890063 | 0 | 82.4 F | 4.14 V | 140 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)