This is the latest recevied telemetry packets stored in our database for station/object OE4EXE-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793614393 | 30 Count | 680 Count | 0 Count | 0 VDC | 0 VDC |
| 1793613789 | 29 Count | 648 Count | 0 Count | 0 VDC | 0 VDC |
| 1793613185 | 28 Count | 616 Count | 0 Count | 0 VDC | 0 VDC |
| 1793612582 | 27 Count | 586 Count | 0 Count | 0 VDC | 0 VDC |
| 1793611978 | 26 Count | 565 Count | 0 Count | 0 VDC | 0 VDC |
| 1793611374 | 25 Count | 540 Count | 0 Count | 0 VDC | 0 VDC |
| 1793610771 | 24 Count | 522 Count | 0 Count | 0 VDC | 0 VDC |
| 1793610167 | 23 Count | 497 Count | 0 Count | 0 VDC | 0 VDC |
| 1793609563 | 22 Count | 477 Count | 0 Count | 0 VDC | 0 VDC |
| 1793609092 | 21 Count | 467 Count | 0 Count | 0 VDC | 0 VDC |
| 1793608488 | 20 Count | 452 Count | 0 Count | 0 VDC | 0 VDC |
| 1793607884 | 19 Count | 420 Count | 0 Count | 0 VDC | 0 VDC |
| 1793607281 | 18 Count | 403 Count | 0 Count | 0 VDC | 0 VDC |
| 1793606677 | 17 Count | 361 Count | 0 Count | 0 VDC | 0 VDC |
| 1793606073 | 16 Count | 344 Count | 0 Count | 0 VDC | 0 VDC |
| 1793605470 | 15 Count | 324 Count | 0 Count | 0 VDC | 0 VDC |
| 1793604866 | 14 Count | 297 Count | 0 Count | 0 VDC | 0 VDC |
| 1793604262 | 13 Count | 283 Count | 0 Count | 0 VDC | 0 VDC |
| 1793603659 | 12 Count | 271 Count | 0 Count | 0 VDC | 0 VDC |
| 1793603055 | 11 Count | 249 Count | 0 Count | 0 VDC | 0 VDC |
| 1793602451 | 10 Count | 231 Count | 0 Count | 0 VDC | 0 VDC |
| 1793601848 | 9 Count | 214 Count | 0 Count | 0 VDC | 0 VDC |
| 1793601244 | 8 Count | 197 Count | 0 Count | 0 VDC | 0 VDC |
| 1793600640 | 7 Count | 179 Count | 0 Count | 0 VDC | 0 VDC |
| 1793600037 | 6 Count | 158 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)