This is the latest recevied telemetry packets stored in our database for station/object SP9VRF-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1784037299 | 4 Count | 3 Count | 0 Count | 0 VDC | 0 VDC |
| 1784035507 | 485 Count | 1003 Count | 0 Count | 0 VDC | 0 VDC |
| 1784033706 | 483 Count | 1000 Count | 0 Count | 0 VDC | 0 VDC |
| 1784031906 | 482 Count | 997 Count | 0 Count | 0 VDC | 0 VDC |
| 1784030105 | 480 Count | 994 Count | 0 Count | 0 VDC | 0 VDC |
| 1784028305 | 479 Count | 991 Count | 0 Count | 0 VDC | 0 VDC |
| 1784026504 | 477 Count | 988 Count | 0 Count | 0 VDC | 0 VDC |
| 1784024703 | 476 Count | 985 Count | 0 Count | 0 VDC | 0 VDC |
| 1784022903 | 475 Count | 982 Count | 0 Count | 0 VDC | 0 VDC |
| 1784021102 | 473 Count | 979 Count | 0 Count | 0 VDC | 0 VDC |
| 1784019302 | 472 Count | 976 Count | 0 Count | 0 VDC | 0 VDC |
| 1784017501 | 470 Count | 973 Count | 0 Count | 0 VDC | 0 VDC |
| 1784015700 | 469 Count | 970 Count | 0 Count | 0 VDC | 0 VDC |
| 1783992302 | 442 Count | 931 Count | 0 Count | 0 VDC | 0 VDC |
| 1783990502 | 441 Count | 928 Count | 0 Count | 0 VDC | 0 VDC |
| 1783988701 | 439 Count | 925 Count | 0 Count | 0 VDC | 0 VDC |
| 1783986901 | 438 Count | 922 Count | 0 Count | 0 VDC | 0 VDC |
| 1783985100 | 436 Count | 919 Count | 0 Count | 0 VDC | 0 VDC |
| 1783970714 | 421 Count | 894 Count | 0 Count | 0 VDC | 0 VDC |
| 1783968914 | 420 Count | 891 Count | 0 Count | 0 VDC | 0 VDC |
| 1783967113 | 418 Count | 888 Count | 0 Count | 0 VDC | 0 VDC |
| 1783965312 | 417 Count | 885 Count | 0 Count | 0 VDC | 0 VDC |
| 1783963512 | 415 Count | 882 Count | 0 Count | 0 VDC | 0 VDC |
| 1783961711 | 414 Count | 879 Count | 0 Count | 0 VDC | 0 VDC |
| 1783959910 | 412 Count | 876 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)