This is the latest recevied telemetry packets stored in our database for station/object SP8SZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793623277 | 414 Count | 783 Count | 380 Count | 0 VDC | 0 VDC |
| 1793619676 | 376 Count | 693 Count | 344 Count | 0 VDC | 0 VDC |
| 1793617875 | 348 Count | 625 Count | 317 Count | 0 VDC | 0 VDC |
| 1793616076 | 332 Count | 597 Count | 302 Count | 0 VDC | 0 VDC |
| 1793614274 | 322 Count | 577 Count | 293 Count | 0 VDC | 0 VDC |
| 1793612474 | 311 Count | 557 Count | 283 Count | 0 VDC | 0 VDC |
| 1793610673 | 298 Count | 534 Count | 271 Count | 0 VDC | 0 VDC |
| 1793608873 | 286 Count | 505 Count | 260 Count | 0 VDC | 0 VDC |
| 1793607078 | 268 Count | 479 Count | 247 Count | 0 VDC | 0 VDC |
| 1793605277 | 255 Count | 453 Count | 235 Count | 0 VDC | 0 VDC |
| 1793603477 | 244 Count | 429 Count | 225 Count | 0 VDC | 0 VDC |
| 1793601676 | 233 Count | 409 Count | 215 Count | 0 VDC | 0 VDC |
| 1793599876 | 218 Count | 378 Count | 201 Count | 0 VDC | 0 VDC |
| 1793598075 | 191 Count | 324 Count | 175 Count | 0 VDC | 0 VDC |
| 1793596275 | 174 Count | 291 Count | 159 Count | 0 VDC | 0 VDC |
| 1793594474 | 158 Count | 261 Count | 144 Count | 0 VDC | 0 VDC |
| 1793592677 | 143 Count | 233 Count | 130 Count | 0 VDC | 0 VDC |
| 1793590873 | 132 Count | 214 Count | 120 Count | 0 VDC | 0 VDC |
| 1793589072 | 121 Count | 197 Count | 110 Count | 0 VDC | 0 VDC |
| 1793587272 | 106 Count | 172 Count | 96 Count | 0 VDC | 0 VDC |
| 1793585478 | 86 Count | 147 Count | 81 Count | 0 VDC | 0 VDC |
| 1793583677 | 73 Count | 124 Count | 69 Count | 0 VDC | 0 VDC |
| 1793581876 | 60 Count | 103 Count | 57 Count | 0 VDC | 0 VDC |
| 1793580076 | 43 Count | 74 Count | 41 Count | 0 VDC | 0 VDC |
| 1793578275 | 26 Count | 44 Count | 25 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)