This is the latest recevied telemetry packets stored in our database for station/object OK2ILA-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1768831438 | 409 | 702 | 5789 | 0 | 0 |
| 1768831135 | 409 | 702 | 5807 | 8260 | 0 |
| 1768830832 | 410 | 702 | 5825 | 8248 | 0 |
| 1768830529 | 410 | 702 | 5847 | 8232 | 0 |
| 1768830226 | 410 | 701 | 5844 | 8270 | 0 |
| 1768829923 | 411 | 701 | 5849 | 8274 | 0 |
| 1768829620 | 411 | 700 | 5841 | 8271 | 0 |
| 1768829317 | 411 | 699 | 5898 | 8274 | 0 |
| 1768829024 | 7077 | 0 | 0 | 0 | 0 |
| 1768829014 | 412 | 698 | 5936 | 8263 | 0 |
| 1768828711 | 412 | 697 | 5935 | 8266 | 0 |
| 1768828408 | 412 | 697 | 5949 | 8267 | 0 |
| 1768828105 | 413 | 696 | 5905 | 8269 | 0 |
| 1768827802 | 413 | 696 | 5865 | 8268 | 0 |
| 1768827196 | 414 | 697 | 5823 | 8269 | 0 |
| 1768826893 | 414 | 697 | 5822 | 8265 | 0 |
| 1768826590 | 414 | 697 | 5783 | 8266 | 0 |
| 1768826287 | 415 | 697 | 5768 | 8270 | 0 |
| 1768825984 | 415 | 697 | 5751 | 8265 | 0 |
| 1768825681 | 415 | 697 | 5793 | 8271 | 0 |
| 1768825384 | 416 | 698 | 5726 | 8266 | 0 |
| 1768825075 | 416 | 698 | 5749 | 8257 | 0 |
| 1768824772 | 416 | 698 | 5728 | 8260 | 0 |
| 1768824469 | 417 | 699 | 5667 | 8267 | 0 |
| 1768824166 | 417 | 699 | 5638 | 8268 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)