This is the latest recevied telemetry packets stored in our database for station/object SQ1BHQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1779731054 | 927 Count | 821 Count | 750 Count | 4.23 VDC | 0.14 VDC |
| 1779729252 | 923 Count | 814 Count | 747 Count | 4.28 VDC | 0.14 VDC |
| 1779727449 | 919 Count | 810 Count | 744 Count | 4.28 VDC | 0.14 VDC |
| 1779725646 | 916 Count | 808 Count | 742 Count | 4.23 VDC | 0.14 VDC |
| 1779723843 | 913 Count | 806 Count | 740 Count | 4.25 VDC | 0.14 VDC |
| 1779722040 | 910 Count | 804 Count | 738 Count | 4.31 VDC | 0.14 VDC |
| 1779720238 | 907 Count | 802 Count | 736 Count | 4.25 VDC | 0.14 VDC |
| 1779718435 | 904 Count | 800 Count | 734 Count | 4.25 VDC | 0.14 VDC |
| 1779716667 | 902 Count | 799 Count | 733 Count | 4.3 VDC | 0.14 VDC |
| 1779714864 | 899 Count | 797 Count | 731 Count | 4.29 VDC | 0.14 VDC |
| 1779713061 | 896 Count | 795 Count | 729 Count | 4.27 VDC | 0.14 VDC |
| 1779711258 | 894 Count | 794 Count | 728 Count | 4.29 VDC | 0.14 VDC |
| 1779709456 | 891 Count | 792 Count | 726 Count | 4.26 VDC | 0.14 VDC |
| 1779707652 | 871 Count | 773 Count | 707 Count | 4.29 VDC | 0.14 VDC |
| 1779705849 | 868 Count | 771 Count | 705 Count | 4.27 VDC | 0.14 VDC |
| 1779704046 | 864 Count | 768 Count | 702 Count | 4.24 VDC | 0.14 VDC |
| 1779702244 | 859 Count | 764 Count | 698 Count | 4.3 VDC | 0.14 VDC |
| 1779700441 | 857 Count | 763 Count | 697 Count | 4.27 VDC | 0.14 VDC |
| 1779698638 | 853 Count | 760 Count | 694 Count | 4.29 VDC | 0.14 VDC |
| 1779696835 | 849 Count | 757 Count | 691 Count | 4.27 VDC | 0.14 VDC |
| 1779695066 | 846 Count | 755 Count | 689 Count | 4.29 VDC | 0.14 VDC |
| 1779693263 | 843 Count | 753 Count | 687 Count | 4.27 VDC | 0.14 VDC |
| 1779691461 | 840 Count | 751 Count | 685 Count | 4.25 VDC | 0.14 VDC |
| 1779689658 | 837 Count | 749 Count | 683 Count | 4.28 VDC | 0.14 VDC |
| 1779687855 | 834 Count | 747 Count | 681 Count | 4.28 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)