This is the latest recevied telemetry packets stored in our database for station/object SP6ICO-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792886438 | 865 Count | 592 Count | 592 Count | 0 VDC | 0 VDC |
| 1792884646 | 862 Count | 590 Count | 590 Count | 0 VDC | 0 VDC |
| 1792882845 | 859 Count | 588 Count | 588 Count | 0 VDC | 0 VDC |
| 1792881044 | 856 Count | 586 Count | 586 Count | 0 VDC | 0 VDC |
| 1792879244 | 853 Count | 584 Count | 584 Count | 0 VDC | 0 VDC |
| 1792877443 | 850 Count | 582 Count | 582 Count | 0 VDC | 0 VDC |
| 1792875643 | 847 Count | 580 Count | 580 Count | 0 VDC | 0 VDC |
| 1792873841 | 844 Count | 578 Count | 578 Count | 0 VDC | 0 VDC |
| 1792872040 | 841 Count | 576 Count | 576 Count | 0 VDC | 0 VDC |
| 1792870240 | 838 Count | 574 Count | 574 Count | 0 VDC | 0 VDC |
| 1792868439 | 835 Count | 572 Count | 572 Count | 0 VDC | 0 VDC |
| 1792866638 | 832 Count | 570 Count | 570 Count | 0 VDC | 0 VDC |
| 1792864838 | 829 Count | 568 Count | 568 Count | 0 VDC | 0 VDC |
| 1792863049 | 826 Count | 566 Count | 566 Count | 0 VDC | 0 VDC |
| 1792861248 | 823 Count | 564 Count | 564 Count | 0 VDC | 0 VDC |
| 1792859447 | 820 Count | 562 Count | 562 Count | 0 VDC | 0 VDC |
| 1792857647 | 817 Count | 560 Count | 560 Count | 0 VDC | 0 VDC |
| 1792855846 | 814 Count | 558 Count | 558 Count | 0 VDC | 0 VDC |
| 1792854045 | 811 Count | 556 Count | 556 Count | 0 VDC | 0 VDC |
| 1792852245 | 808 Count | 554 Count | 554 Count | 0 VDC | 0 VDC |
| 1792850444 | 805 Count | 552 Count | 552 Count | 0 VDC | 0 VDC |
| 1792848644 | 802 Count | 550 Count | 550 Count | 0 VDC | 0 VDC |
| 1792846843 | 798 Count | 547 Count | 547 Count | 0 VDC | 0 VDC |
| 1792845042 | 796 Count | 546 Count | 546 Count | 0 VDC | 0 VDC |
| 1792843242 | 795 Count | 546 Count | 546 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)