This is the latest recevied telemetry packets stored in our database for station/object GM4HYG-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775755548 | 196 Count | 344 Count | 165 Count | 0 VDC | 0 VDC |
| 1775754644 | 194 Count | 343 Count | 164 Count | 0 VDC | 0 VDC |
| 1775753741 | 192 Count | 342 Count | 163 Count | 0 VDC | 0 VDC |
| 1775752837 | 188 Count | 337 Count | 160 Count | 0 VDC | 0 VDC |
| 1775751934 | 186 Count | 336 Count | 159 Count | 0 VDC | 0 VDC |
| 1775751030 | 184 Count | 335 Count | 158 Count | 0 VDC | 0 VDC |
| 1775750126 | 180 Count | 330 Count | 155 Count | 0 VDC | 0 VDC |
| 1775749223 | 176 Count | 327 Count | 152 Count | 0 VDC | 0 VDC |
| 1775748319 | 166 Count | 309 Count | 143 Count | 0 VDC | 0 VDC |
| 1775747416 | 163 Count | 306 Count | 141 Count | 0 VDC | 0 VDC |
| 1775746513 | 161 Count | 292 Count | 140 Count | 0 VDC | 0 VDC |
| 1775745609 | 159 Count | 275 Count | 139 Count | 0 VDC | 0 VDC |
| 1775744705 | 155 Count | 259 Count | 136 Count | 0 VDC | 0 VDC |
| 1775743802 | 152 Count | 252 Count | 134 Count | 0 VDC | 0 VDC |
| 1775742898 | 144 Count | 231 Count | 127 Count | 0 VDC | 0 VDC |
| 1775741995 | 133 Count | 209 Count | 117 Count | 0 VDC | 0 VDC |
| 1775741092 | 131 Count | 201 Count | 116 Count | 0 VDC | 0 VDC |
| 1775740188 | 114 Count | 175 Count | 100 Count | 0 VDC | 0 VDC |
| 1775739285 | 93 Count | 144 Count | 80 Count | 0 VDC | 0 VDC |
| 1775738464 | 87 Count | 138 Count | 79 Count | 0 VDC | 0 VDC |
| 1775737560 | 86 Count | 136 Count | 79 Count | 0 VDC | 0 VDC |
| 1775736657 | 81 Count | 128 Count | 75 Count | 0 VDC | 0 VDC |
| 1775735753 | 79 Count | 127 Count | 74 Count | 0 VDC | 0 VDC |
| 1775734849 | 66 Count | 102 Count | 62 Count | 0 VDC | 0 VDC |
| 1775733946 | 56 Count | 87 Count | 53 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)