K0FTT Automobiles

My position About ☰

reset

IW2CLJ-8 Raw Packets

This is the latest recevied packets stored in our database for station/object IW2CLJ-8. If no packets are shown the sender has not sent any packets the latest 24 hours.

If you compare the raw packets with similar data from other websites it may differ (especially the path), the reason is that we are not collecting packets from the same APRS-IS servers. Each APRS-IS server performes duplicate filtering, and which packet that is considered to be a duplicate may differ depending on which APRS-IS server you receive your data from.

<< 1 2 3 4 >>

1778688436: IW2CLJ-8>APLRT1,WIDE1-1,qAO,IW2CLJ-13:=/7P)1Pj>o[BeQ Bat=4.19V 99%

1778687533: IW2CLJ-8>APLRT1,WIDE1-1,qAO,IW2CLJ-13:=/7P)APj>v[CUQ Bat=4.19V 99%

1778686630: IW2CLJ-8>APLRT1,WIDE1-1,qAO,IW2CLJ-13:=/7P)FPj?([C)Q Bat=4.20V 99%

1778685727: IW2CLJ-8>APLRT1,WIDE1-1,qAO,IW2CLJ-13:=/7P)RPj>M[ApQ Bat=4.19V 99%

1778684824: IW2CLJ-8>APLRT1,WIDE1-1,qAO,IW2CLJ-13:=/7P)ZPj>j[C8Q Bat=4.20V 99%

1778684798: IW2CLJ-8>APLRT1,WIDE1-1,qAO,IW2CLJ-13:=/7P*gPj=d[C-Q Bat=4.19V 99%

1778684703: IW2CLJ-8>APLRT1,WIDE1-1,qAO,IW2CLJ-13:=/7P)/Pj>Y[BsQ Bat=4.20V 99%

1778684394: IW2CLJ-8>APLRT1,WIDE1-1,qAR,IW2LGC-10:=/7P)RPj?x[DdQ Bat=4.20V 99%

1778683612: IW2CLJ-8>APLRT1,WIDE1-1,qAO,IW2CLJ-13:=/7P)SPj>V[ARQ Bat=4.19V 99%

1778683534: IW2CLJ-8>APLRT1,WIDE1-1,qAO,IW2CLJ-13:=/7P'`Pj>J[BFQ Bat=4.19V 99%

1778683425: IW2CLJ-8>APLRT1,WIDE1-1,qAO,IW2CLJ-13:=/7P+@Pj>E[B*Q Bat=4.19V 99%

1778683387: IW2CLJ-8>APLRT1,WIDE1-1,qAR,IW2LGC-10:=/7P)4Pj>M[AwQ Bat=4.19V 99%

1778682484: IW2CLJ-8>APLRT1,WIDE1-1,qAO,IW2CLJ-13:=/7P)CPj>c[B0Q Bat=4.19V 99%

1778681581: IW2CLJ-8>APLRT1,WIDE1-1,qAO,IW2CLJ-13:=/7P)xPj>M[BPQ Bat=4.20V 99%

1778681229: IW2CLJ-8>APLRT1,WIDE1-1,qAO,IW2CLJ-13:=/7P()Pj>^[A_Q Bat=4.20V 99%

1778680659: IW2CLJ-8>APLRT1,WIDE1-1,qAO,IW2CLJ-13:=/7P)yPj?#[@5Q Bat=4.19V 99%

1778680520: IW2CLJ-8>APLRT1,WIDE1-1,qAO,IW2CLJ-13:=/7P+kPj?H[<;Q Bat=4.20V 99%

1778680481: IW2CLJ-8>APLRT1,WIDE1-1,qAO,IW2CLJ-13:=/7P*BPj>T[?0Q Bat=4.20V 99%

1778680029: IW2CLJ-8>APLRT1,WIDE1-1,qAO,IW2CLJ-13:=/7P(FPj>`[B!Q Bat=4.19V 99%

1778679126: IW2CLJ-8>APLRT1,WIDE1-1,qAO,IW2CLJ-13:=/7P'nPj>M[B`Q Bat=4.19V 99%

1778678928: IW2CLJ-8>APLRT1,WIDE1-1,qAO,IW2CLJ-13:=/7P)^Pj>v[BmQ Bat=4.20V 99%

1778678890: IW2CLJ-8>APLRT1,WIDE1-1,qAO,IW2CLJ-13:=/7P'RPj>[[BlQ Bat=4.19V 99%

1778678759: IW2CLJ-8>APLRT1,WIDE1-1,qAO,IW2CLJ-13:=/7P)<Pj?4[C_Q Bat=4.20V 99%

1778678517: IW2CLJ-8>APLRT1,WIDE1-1,qAO,IW2CLJ-13:=/7P($Pj>3[AKQ Bat=4.20V 99%

1778678435: IW2CLJ-8>APLRT1,WIDE1-1,qAO,IW2CLJ-13:=/7P+1Pj>T[AAQ Bat=4.20V 99%

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: