K0FTT Automobiles

My position About ☰

reset

KK7SKY-10 Raw Packets

This is the latest recevied packets stored in our database for station/object KK7SKY-10. If no packets are shown the sender has not sent any packets the latest 24 hours.

If you compare the raw packets with similar data from other websites it may differ (especially the path), the reason is that we are not collecting packets from the same APRS-IS servers. Each APRS-IS server performes duplicate filtering, and which packet that is considered to be a duplicate may differ depending on which APRS-IS server you receive your data from.

1777383315: KK7SKY-10>APDR16,TCPIP*,qAC,T2KA:=4234.2 N/11430.2 W$146.460MHz/A=003631 smile

1777382115: KK7SKY-10>APDR16,TCPIP*,qAC,T2KA:=4234.2 N/11430.2 W$146.460MHz/A=003631 smile

1777380915: KK7SKY-10>APDR16,TCPIP*,qAC,T2KA:=4234.2 N/11430.2 W$146.460MHz/A=003630 smile

1777379715: KK7SKY-10>APDR16,TCPIP*,qAC,T2KA:=4234.2 N/11430.2 W$146.460MHz/A=003630 smile

1777378515: KK7SKY-10>APDR16,TCPIP*,qAC,T2KA:=4234.2 N/11430.2 W$146.460MHz/A=003629 smile

1777377315: KK7SKY-10>APDR16,TCPIP*,qAC,T2KA:=4234.2 N/11430.2 W$146.460MHz/A=003628 smile

1777376115: KK7SKY-10>APDR16,TCPIP*,qAC,T2KA:=4234.2 N/11430.2 W$146.460MHz/A=003628 smile

1777374915: KK7SKY-10>APDR16,TCPIP*,qAC,T2KA:=4234.2 N/11430.2 W$146.460MHz/A=003626 smile

1777373715: KK7SKY-10>APDR16,TCPIP*,qAC,T2KA:=4234.2 N/11430.2 W$146.460MHz/A=003625 smile

1777372515: KK7SKY-10>APDR16,TCPIP*,qAC,T2KA:=4234.2 N/11430.2 W$146.460MHz/A=003625 smile

1777371315: KK7SKY-10>APDR16,TCPIP*,qAC,T2KA:=4234.2 N/11430.2 W$146.460MHz/A=003628 smile

1777370115: KK7SKY-10>APDR16,TCPIP*,qAC,T2KA:=4234.2 N/11430.2 W$288/000/146.460MHz/A=003614 smile

1777369389: KK7SKY-10>APDR16,TCPIP*,qAC,T2KA:=4234.2 N/11430.2 W$146.460MHz/A=003608 smile

1777369353: KK7SKY-10>APDR16,TCPIP*,qAC,T2KA:=4234.2 N/11430.2 W$288/000/146.460MHz/A=003587 smile

1777369324: KK7SKY-10>APDR16,TCPIP*,qAC,T2KA:=4234.2 N/11430.2 W$288/000/146.460MHz/A=003652 smile

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: