K0FTT Automobiles

My position About ☰

reset

KF0CLO Raw Packets

This is the latest recevied packets stored in our database for station/object KF0CLO. If no packets are shown the sender has not sent any packets the latest 24 hours.

If you compare the raw packets with similar data from other websites it may differ (especially the path), the reason is that we are not collecting packets from the same APRS-IS servers. Each APRS-IS server performes duplicate filtering, and which packet that is considered to be a duplicate may differ depending on which APRS-IS server you receive your data from.

<< 1 2 >>

1784328749: KF0CLO>SXSWLZ,WIDE1-1,WIDE2-1,qAR,AD0EC:`v.l M/`"5d}146.850MHz Hello, STL!_1

1784268667: KF0CLO>SXSWLZ,WIDE1-1,WIDE2-1,qAR,AD0EC:`v.l M/`"5h}146.940MHz Hello, STL!_1

1784268438: KF0CLO>SXSWLZ,WIDE1-1,WIDE2-1,qAR,AD0EC:`v.l -/`"5h}146.940MHz Hello, STL!_1

1784268053: KF0CLO>SXSWLZ,WIDE1-1,WIDE2-1,qAO,K0AMC-5:`v.l /3`"5j}146.940MHz Hello, STL!_1

1784268049: KF0CLO>APY300,WIDE1-1,WIDE2-1,qAO,K0AMC-5::WXBOT :63139{06

1784267934: KF0CLO>SXSWLZ,WIDE1-1,WIDE2-1,qAO,K0AMC-5:`v.l -3`"5i}146.940MHz Hello, STL!_1

1784267931: KF0CLO>APY300,WIDE1-1,WIDE2-1,qAR,AD0EC::WXBOT :63139{06

1784267817: KF0CLO>SXSWLZ,WIDE1-1,WIDE2-1,qAR,AD0EC:`v.l YY`"5q}146.940MHz Hello, STL!_1

1784267705: KF0CLO>APY300,WIDE1-1,WIDE2-1,qAR,AD0EC::WXBOT :63139{06

1784267637: KF0CLO>APY300,WIDE1-1,WIDE2-1,qAO,K0AMC-5::WXBOT :63139{06

1784267582: KF0CLO>S8SWLZ,WIDE1-1,WIDE2-1,qAR,KD0ZEA-6:`v.l YY`"5k}146.940MHz Hello, STL!_1

1784267339: KF0CLO>APY300,WIDE1-1,WIDE2-1,qAR,AD0EC::SMS :ack7975

1784267281: KF0CLO>S8SWLZ,qAR,AD0EC:`v.l YY`"5j}146.850MHz Hello, STL!_1

1784267269: KF0CLO>APY300,WIDE1-1,WIDE2-1,qAR,AD0EC::SMS :ack7975

1784267205: KF0CLO>APY300,WIDE1-1,WIDE2-1,qAR,KD0ZEA-6::SMS :@3144064709 test kf0clo{05

1784267155: KF0CLO>APY300,WIDE1-1,WIDE2-1,qAR,AD0EC::SMS :@3144064709 test kf0clo{05

1784267080: KF0CLO>APY300,WIDE1-1,WIDE2-1,qAR,KD0ZEA-6::SMSGTE :@3144064709 test kf0clo{04

1784267038: KF0CLO>APY300,WIDE1-1,WIDE2-1,qAR,KD0ZEA-6::SMSGTE :@3144064709 test kf0clo{04

1784266977: KF0CLO>S8SWLZ,WIDE1-1,qAR,KD0ZEA-6:`v.l YY`"5k}146.850MHz Hello, STL!_1

1784266879: KF0CLO>APY300,WIDE1-1,WIDE2-1,qAR,AD0EC::SMSGTE :?APRSP

1784266831: KF0CLO>APY300,WIDE1-1,WIDE2-1,qAR,KD0ZEA-6::SMSGTE :@3144064709 test kf0clo{03

1784266767: KF0CLO>APY300,WIDE1-1,WIDE2-1,qAR,KD0ZEA-6::SMSGTE :@3144064709 test kf0clo{03

1784266702: KF0CLO>APY300,WIDE1-1,WIDE2-1,qAO,K0AMC-5::SMSGTE :@3144064709 test kf0clo{03

1784266672: KF0CLO>S8SWLZ,qAR,AD0EC:`v.l YY`"5j}146.850MHz Hello, STL!_1

1784266648: KF0CLO>APY300,WIDE1-1,WIDE2-1,qAO,K0AMC-5::SMSGTE :@3144064709 test kf0clo{03

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: