K0FTT Automobiles

My position About ☰

reset

KM7BSV-10 Raw Packets

This is the latest recevied packets stored in our database for station/object KM7BSV-10. If no packets are shown the sender has not sent any packets the latest 24 hours.

If you compare the raw packets with similar data from other websites it may differ (especially the path), the reason is that we are not collecting packets from the same APRS-IS servers. Each APRS-IS server performes duplicate filtering, and which packet that is considered to be a duplicate may differ depending on which APRS-IS server you receive your data from.

<< 1 2 3 4 >>

1784881404: KM7BSV-10>APDR16,TCPIP*,qAC,T2CAEAST:=4334.14N/11623.46W$146.520MHz

1784880422: KM7BSV-10>APDR16,TCPIP*,qAC,T2CAEAST:=4334.14N/11623.46W$146.520MHz

1784876753: KM7BSV-10>APDR16,TCPIP*,qAC,T2CAEAST:=4334.14N/11623.46W$146.520MHz

1784876711: KM7BSV-10>APDR16,TCPIP*,qAC,T2CAEAST::KC7IDO-10:ack11

1784876679: KM7BSV-10>APDR16,TCPIP*,qAC,T2CAEAST::KC7IDO-10:ack10

1784876678: KM7BSV-10>APDR16,TCPIP*,qAC,T2CAEAST::KC7IDO-10:I will send an email tomorrow. Good night KC7IDO!{12

1784876650: KM7BSV-10>APDR16,TCPIP*,qAC,T2CAEAST::KC7IDO-10:It's getting late and I need to go to bed but I found your QRZ page{11

1784876590: KM7BSV-10>APDR16,TCPIP*,qAC,T2CAEAST::KC7IDO-10:I have to abort after sending or else I think APRSdroid repeats{10

1784876572: KM7BSV-10>APDR16,TCPIP*,qAC,T2CAEAST::KC7IDO-10:Oh neat! Okay, so sending messages to SSID -10 does work, but{9

1784876528: KM7BSV-10>APDR16,TCPIP*,qAC,T2CAEAST::KC7IDO-10:ack9

1784876504: KM7BSV-10>APDR16,TCPIP*,qAC,T2CAEAST::KC7IDO-10:Do you see this message? Say "orange"{8

1784876492: KM7BSV-10>APDR16,TCPIP*,qAC,T2CAEAST::KC7IDO-5 :Do you see this message? Say "apple"{11

1784876457: KM7BSV-10>APDR16,TCPIP*,qAC,T2CAEAST::KC7IDO-10:ack8

1784876439: KM7BSV-10>APDR16,TCPIP*,qAC,T2CAEAST::KC7IDO-5 :It doesn't look like the message to -10 goes through on my end{10

1784876435: KM7BSV-10>APDR16,TCPIP*,qAC,T2CAEAST::KC7IDO-5 :I think I can only message SSID -5{9

1784876420: KM7BSV-10>APDR16,TCPIP*,qAC,T2CAEAST::KC7IDO-10:It doesn't look like the message goes through on my end{7

1784876349: KM7BSV-10>APDR16,TCPIP*,qAC,T2CAEAST::KC7IDO-5 :It doesn't look like the message to -10 goes through on my end{10

1784876336: KM7BSV-10>APDR16,TCPIP*,qAC,T2CAEAST:=4334.14N/11623.46W$146.520MHz

1784876329: KM7BSV-10>APDR16,TCPIP*,qAC,T2CAEAST::KC7IDO-10:It doesn't look like the message goes through on my end{7

1784876314: KM7BSV-10>APDR16,TCPIP*,qAC,T2CAEAST::KC7IDO-5 :I think I can only message SSID -5{9

1784876279: KM7BSV-10>APDR16,TCPIP*,qAC,T2CAEAST::KC7IDO-10:Oh dear, I am confusing myself too. Does this one work now?{6

1784876267: KM7BSV-10>APDR16,TCPIP*,qAC,T2CAEAST::KC7IDO-10:ack7

1784876223: KM7BSV-10>APDR16,TCPIP*,qAC,T2CAEAST::KC7IDO-5 :I think I can only message SSID -5{9

1784876189: KM7BSV-10>APDR16,TCPIP*,qAC,T2CAEAST::KC7IDO-10:Oh dear, I am confusing myself too. Does this one work now?{6

1784876134: KM7BSV-10>APDR16,TCPIP*,qAC,T2CAEAST::KC7IDO-10:ack6

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: