K0FTT Automobiles

My position About ☰

reset

F4VSE-7 Raw Packets

This is the latest recevied packets stored in our database for station/object F4VSE-7. If no packets are shown the sender has not sent any packets the latest 24 hours.

If you compare the raw packets with similar data from other websites it may differ (especially the path), the reason is that we are not collecting packets from the same APRS-IS servers. Each APRS-IS server performes duplicate filtering, and which packet that is considered to be a duplicate may differ depending on which APRS-IS server you receive your data from.

1793616537: F4VSE-7>APBM1D,TETRA*,qAR,BM2002-10:=5100.21N/00221.29E[360/000via TETRA

1793616237: F4VSE-7>APBM1D,TETRA*,qAR,BM2002-10:=5100.21N/00221.29E[360/000via TETRA

1793616037: F4VSE-7>APBM1D,TETRA*,qAR,BM2002-10:=5100.21N/00221.29E[360/000via TETRA

1793615737: F4VSE-7>APBM1D,TETRA*,qAR,BM2002-10:=5100.21N/00221.29E[360/000via TETRA

1793615437: F4VSE-7>APBM1D,TETRA*,qAR,BM2002-10:=5100.21N/00221.29E[067/003via TETRA

1793615137: F4VSE-7>APBM1D,TETRA*,qAR,BM2002-10:=5100.21N/00221.29E[360/000via TETRA

1793614837: F4VSE-7>APBM1D,TETRA*,qAR,BM2002-10:=5100.21N/00221.28E[337/000via TETRA

1793614537: F4VSE-7>APBM1D,TETRA*,qAR,BM2002-10:=5100.21N/00221.28E[135/001via TETRA

1793614237: F4VSE-7>APBM1D,TETRA*,qAR,BM2002-10:=5100.21N/00221.29E[360/000via TETRA

1793613937: F4VSE-7>APBM1D,TETRA*,qAR,BM2002-10:=5100.23N/00221.26E[360/003via TETRA

1793613637: F4VSE-7>APBM1D,TETRA*,qAR,BM2002-10:=5100.21N/00221.29E[270/008via TETRA

1793613337: F4VSE-7>APBM1D,TETRA*,qAR,BM2002-10:=5100.21N/00221.29E[360/000via TETRA

1793613037: F4VSE-7>APBM1D,TETRA*,qAR,BM2002-10:=5100.21N/00221.29E[360/000via TETRA

1793612737: F4VSE-7>APBM1D,TETRA*,qAR,BM2002-10:=5100.20N/00221.30E[045/000via TETRA

1793612437: F4VSE-7>APBM1D,TETRA*,qAR,BM2002-10:=5100.22N/00221.28E[315/007via TETRA

1793612137: F4VSE-7>APBM1D,TETRA*,qAR,BM2002-10:=5100.21N/00221.29E[292/001via TETRA

1793612023: F4VSE-7>APBM1D,TETRA*,qAR,BM2002-10:=5100.21N/00221.29E[292/001via TETRA

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: